Support Mechanical Engineering department in teaching, research and community service relating to the fields of mechanics of material strength, statistics, experimental mechanics, kinematics, dynamics and mechanical vibrations.
Machine Fundamental Phenomena Laboratory
1. Two Dimensional Truss
The aim of the experiment is to determine the experimental values ​​of the forces acting on a crane with a cantilever wall.
2. Three Dimensional Truss
The practicum aims to use the vertical load on the top of the rod to form experimental forces from each rod and calculate the forces on the rod using the tensile stress coefficient method and compare the experimental results with the theoretical.
3. Reaction of Indeterminate Static Support
The aim of the practicum is to understand the statically indeterminate construction of the flexural beam structure and to look for the support reaction from the statically indeterminate structure of the flexural beam which is subjected to a concentrated force.
4. Bending Beam Deflection
The aim of the practicum is to understand certain static constructions in the flexural beam structure and to find the deflection in the flexural beam structure which is supported by a simple support and is subjected to a load in the form of a concentrated force.
5. Buckling Phenomenon
The practicum aims to understand the phenomenon of buckling on the column, determine the critical load of the column with hinge-roll and roll-clamp support conditions and compare experimental results with theoretical calculations.
6. Moment of Inertia
The practicum aims to determine experimentally the mass moment of inertia of the disk, and to compare the results obtained with the theoretical results obtained from the mass and physical dimensions of the disk.
7. Balancing
The practicum aims to analyze inertial forces theoretically and experimentally on the arrangement of unbalanced masses that move in rotation on the machine, which causes vibrations in the cantilever beam.
8. Slider Crank Mechanism
The aim of the practicum is to understand the working principle of the slider crank mechanism and to find the position of the piston rod as a function of crankshaft rotation.
9. Continuous System Vibration
The aim of the practicum is to understand the free vibration and forced vibration in the flexural beam structure and to find the effective mass and natural frequency of the flexural beam structure with free vibration and forced vibration.
10. Discrete System Vibration
The aim of the practicum is to understand the free vibration and forced vibration in the flexural beam structure and to find the effective mass and natural frequency of the flexural beam structure with free vibration and forced vibration.
A. Lecturer
| No. | Title | Year |
| 1 | Design and Build Data Logger for Experimental Data Retrieval in the Machine Fundamental Phenomena Laboratory | 2019 |
| 2 | Design and Build Equipment for Palm Oil Empty Fruit Bunches | 2018 |
| 3 | Finite Element and Experimental Study of Octagonal Ring Transducer | 2017 |
Â
B. Student Final Project
| No. | Title | Year |
| 1 | Analysis of kinematic phenomena on the planetary gear train | 2019 |
| 2 | Experimental study of indeterminate static structure : clamped – clamped | 2019 |
| 3 | Load cell test for measuring axial force and torque of the spoke wheel type | 2019 |
| 4 | Equipment for analyzing the effect of the gyroscope on the balance of the tool | 2019 |
| 5 | Kinematic analysis of excavator arm modeling | 2019 |
| 6 | Excavator arm modeling design | 2019 |
| 7 | Design and build laboratory-scale excavator wheels | 2019 |
| 8 | Hollow tube drill dynamometer design | 2019 |
| 9 | Free and forced vibration analysis with one degree of freedom viscous damper | 2019 |
| 10 | Buckling on strip plate | 2018 |
| 11 | Designing a control system for the stability of one degree of freedom inverted pendulum (inverted pendulum) | 2018 |
| 12 | Design of robotic arm motion using a microcontroller | 2018 |
| 13 | Design of mini fresh fruit bunches for oil palm plantations in Indonesia | 2018 |
| 14 | Design and build a hoist model on a laboratory-scale single girder gantry crane with a capacity of 10 kg. | 2018 |
| 15 | Free vibration test of one degree of freedom discrete mass system | 2018 |
| 16 | Analysis of structural strength on flat carriages | 2018 |
| 17 | Analysis of the strength of the support structure of the overhead crane with a capacity of 2 x 20 tons | 2018 |
| 18 | Design and build tool for chopping oil palm empty fruit bunches | 2018 |
| 19 | Design and build a dynamometer tool with an octagonal loadcell perpendicular to the lathe | 2018 |
| 20 | Experimental analysis of centrifugal force | 2018 |
| 21 | Design and analysis of the oscillation system on the chassis of the vehicle transporting oil palm fruit bunches | 2017 |
| 22 | Analysis of the strength of the laboratory-scale truss type gantry crane using finite element-based software | 2017 |
| 23 | Design and build a laboratory-scale jib crane | 2017 |
| 24 | Analysis of the structural strength of the freestanding type jib crane using finite element-based software | 2017 |
| 25 | Design and build a hoist and drive motor on a laboratory-scale gantry crane | 2017 |
| 26 | Analysis of the flexural beam structure using a strain sensor | 2017 |
| 27 | Design and Analysis of the strength of the octagonal ring load cell | 2017 |
| No. | Title | Year |
| 1 | Experimental Mechanics Training | 2019 |
| 2 | Experimental Mechanics Training Using Strain Sensors | 2018 |
| 3 | Experimental Mechanics Training for Practitioners & Industry | 2017 |
| 4 | Experimental Mechanics Training for High School Students | 2016 |
- Design of Universal Connector on Mini Transporter of Oil Palm Fresh Fruit Bunches. Scientific Journal of Mechanical Engineering, Vol 10 No.1, January 2019.
- One Degree of Freedom Discrete System Vibration Simulation. Scientific Journal of Mechanical Engineering, Vol 10 No.1, January 2019.
- Structural Strength Analysis on Flat Carriages. Scientific Journal of Mechanical Engineering, Vol 10 No.1, January 2019.
- Strength Analysis of Overhead Crane Support Structure 2 x 20 Tons. Scientific Journal of Mechanical Engineering, Vol 10 No.1, January 2019.
- Equipment Design to Enumerate Oil Palm Empty Fruit Bunch. Proceedings of SNTTM XVII, October 2018, pp. 092-098.
- The use of an extended octagonal ring transducer type load cell for the buckling test on the beam. Indonesian Journal of Mechanical Engineering, Vol. 12 No. 2, October 2017.
- Design of Mini Size Fresh Fruit Bunches Transport Equipment in Oil Palm Gardens. Proceedings of SNTTM XV, October 2016.
- HFC 1: Rod Reaction
- HFC 2: Rod Force
- HFC 3: Pole Force
- HFC 4: Slide Force
- HFC 5: Bending Moment
- HFC 6: Vertical Work
- HFC 7 : Tangential Work
- HFC 8 : Center Point
- HFC 9 : Lever
- HFC 10 : Flatcher Tolley
- HFC 11 : Acceleration
- HFC 12 : Three Wire Suspension
- HFC 13 : Rolling Disc
- HFC 14 : Wall Jib Crane
- HFC 15 : Derrick Crane
- HFC 16 : Testaric Coefficient
- HFC 17 : Roof Frame
- HFC 18 : Sliding Feet
- HFC 19 : Hinged Connection
- HFC 20 : Simple Moment
- HFC 21 : Centrifugal Force
- HFC 22 : Shear Force on Rubber
- HFC 23 : Forces
- HFC 24 : Conversion Moment
- BSMI : Moire Drawing Pattern
- BSM2 : Analysis with photo elasticity
- BSLI : Bending Beam
- BSG : Mechanical Vibration
Campus A, F & G (Hery Hartanto) Building 2nd Floor
Mechanical Engineering Department, Faculty of Industrial Technology, Universitas Trisakti
- Head of Laboratory : Ir. Tono Sukarnoto, M.T., I.P.M.
- Practicum Coordinator : M. Ihram Maulana, S.T., M.T.
- Head of Practicum : M. Ihram Maulana, S.T., M.T.
- Laboratory Assistant : Alief Muharram Mustajab, S.Tr.T.
- Email : lab.fdm_tm.fti@trisakti.ac.id
